Introduction
This Feet to Miles Calculator changes feet into miles in one step. Type a number of feet, and you get the miles right away. You can also go the other way and change miles into feet by typing in the miles box.
The math is simple: 1 mile equals 5,280 feet. To get miles, you divide the feet by 5,280. To get feet, you multiply the miles by 5,280. The tool runs that math and shows each step, so you can see how the answer was found.
You can pick how many decimal places you want, up to 14. If your answer looks like 0, add more decimal places. You can also switch to "ft + in" mode to enter feet and inches together, like 5 ft 6 in.
Along with miles, the tool shows your length in inches, yards, meters, kilometers, and nautical miles. There is a chart that marks your value and a table of common feet to miles conversions. This helps with school work, running and walking distances, maps, building plans, and any job where you need to change feet to miles fast.
How to use our Feet to Miles Calculator
Type a length in feet to get the distance in miles, or type miles to get feet. The tool shows your answer, the math steps, a chart, and extra units like inches, yards, meters, kilometers, and nautical miles.
Feet (ft): Enter the number of feet you want to change into miles. The miles box fills in right away.
ft + in button: Click this to enter feet and inches apart. Put whole feet in the first box and inches (0 to 11) in the second box. Click it again to go back to plain feet.
Miles (mi): Click this box and enter miles to convert miles to feet. The feet box then becomes the answer.
Decimal Places: Pick how many numbers show after the decimal point. Small feet values need more decimal places, so raise this if your answer shows 0.
Swap: Click to flip the direction between feet to miles and miles to feet.
Convert: Click to run the conversion and update the result, steps, chart, and table.
Copy: Click to copy the answer so you can paste it somewhere else.
Clear: Click to empty both boxes and start over.
Feet to Miles: What It Means
Feet and miles are both units of length in the US customary and imperial systems. A foot is short, about the length of a large shoe, or 12 inches. A mile is long, and it is the unit people use for roads, running races, and travel. One mile holds exactly 5,280 feet. That number is fixed, so converting between the two is always exact.
The Formula
To change feet into miles, divide by 5,280:
miles = feet ÷ 5,280
To go the other way, multiply by 5,280:
feet = miles × 5,280
Example: 10,560 feet ÷ 5,280 = 2 miles. Example: 0.5 miles × 5,280 = 2,640 feet.
Why 5,280?
The number comes from old English measures. A mile was set at 8 furlongs, and each furlong was 660 feet. 8 × 660 = 5,280. The measure was made official in England in 1593 and is still used in the United States today.
Quick Numbers to Remember
- 1 mile = 5,280 feet = 1,760 yards = 63,360 inches
- 1 mile = 1,609.344 meters = 1.609344 kilometers
- 1 foot = 0.3048 meters (exact) = 0.000189394 miles
- Half a mile = 2,640 feet
- Quarter mile = 1,320 feet (one lap of a short track)
- 100 feet ≈ 0.0189 miles
Where People Use This
Runners and walkers change step counts or field lengths into miles. Builders and surveyors work in feet but report road or pipe length in miles. Pilots read altitude in feet but distance in miles. Hikers use feet for elevation gain and miles for trail length. Real estate listings often give lot size in feet and distance to town in miles.
Watch Out For These
Because one mile is so big, small foot amounts turn into very small mile numbers. A 20-foot room is only about 0.0038 miles, so you may need more decimal places to see a number other than zero. Also, a statute mile (5,280 feet) is not the same as a nautical mile (6,076.12 feet), which is used at sea and in the air. Use the statute mile for roads and land.