Introduction
This Ring Size Calculator tells you what ring size to buy. You only need one measurement: the distance around your finger, or the inside width of a ring you already wear.
Pick your method, type in your number in millimeters or inches, and the tool shows your US ring size right away. It also shows the matching size in the UK, Europe, Japan, India, France, Germany, Italy, and more, so you can shop from any store or website.
You also get the exact inner diameter and circumference for your size, a full size chart with your match marked, and a step-by-step look at the math. If your number falls between two sizes, the tool says so and helps you choose the better fit.
Use it before you buy a wedding band, an engagement ring, or a gift, so the ring fits the first time and you skip the cost of resizing.
How to use our Ring Size Calculator
Tell us how you measured your finger and enter that number. The calculator then shows your US ring size, plus your finger circumference, inner diameter, international size conversions, a size chart, and a step-by-step solution.
Measurement Method: Pick String / Thread (Circumference) if you wrapped a string or strip of paper around your finger and measured the length. Pick Existing Ring (Inner Diameter) if you measured straight across the inside of a ring that already fits well.
Your Measurement: Type your number in the box. For the string method, enter the length of the wrap. For the ring method, enter the inside width of the ring. Decimals are fine, like 52.4.
Unit (mm or inches): Choose the unit that matches your ruler. If you switch units, the number you typed is changed for you, so you do not have to redo the math.
Slider: Drag the slider instead of typing, or use your arrow keys for small steps. Within the chart's range, the box and the slider match, and results update as you move.
Calculate button: Click it to see your ring size right away. Results also refresh on their own a moment after you stop typing.
Reset button: Click it to clear your entry and go back to the default measurement in millimeters.
Ring Size: What It Means
A ring size is just a number for how big the inside of a ring is. It comes from two measurements:
- Inner circumference is the distance all the way around the inside of the band. This should match the distance around your finger.
- Inner diameter is the straight line across the inside of the ring, from edge to edge.
The two are linked by one simple rule: circumference = diameter × π (about 3.14). So if you know one, you know the other. A US size 6 ring, for example, has an inner diameter of about 16.5 mm and an inner circumference of about 51.8 mm.1
How to Measure Your Ring Size
There are two easy ways to do it at home:
- String or paper strip. Wrap a thin string, floss, or a strip of paper snugly around the base of your finger. Mark where the ends meet, then lay it flat on a ruler and read the length in millimeters. That number is your finger circumference.
- A ring you already own. Take a ring that fits that finger well, lay it flat, and measure straight across the inside from one inner edge to the other. That number is the inner diameter.
Millimeters give the best results because ring sizes are only about 0.8 mm apart in diameter. Even a small mistake can move you a full size.
Tips for an Accurate Fit
- Finger size changes with the time of day, so a reading taken on a cool morning can differ from one taken in the afternoon.1
- Temperature matters too. Fingers shrink in the cold and swell in the heat.1
- Check your knuckle too. For most people the knuckle is larger than the rest of the finger, and the ring must slide over it.1
- The ring finger on your dominant hand is typically about a half size bigger than the other one.1
- Wide bands fit more snugly, so they usually need to be a bit larger.1
- Measure two or three times and use the average. Our average calculator makes that quick.
Ring Sizes Around the World
Every country uses a different scale, but they all describe the same inside measurement. The US and Canada use numbers in quarter sizes.1 The UK and Australia use letters in half-letter steps.1 The ISO 8653 standard defines ring size as the inner circumference in millimeters, and Europe uses that scale. Japan, China, and other parts of Asia use their own number scale.1 That is why a US 6, with an inner circumference of about 51.8 mm, is a UK L.1 Its circumference of about 52 mm is also its EU size.
If You Land Between Two Sizes
The calculator recommends the chart size closest to your measurement and shows the two sizes you fall between. If you are unsure, choose the larger of the two. It is easier to remove metal from a ring that is too big than to add metal to one that is too small.1 Small beads can also be added inside a ring that is too big to make it fit tighter.1 Keep in mind that rings with stones all the way around the band (eternity rings) can be very difficult to resize, so measure carefully before you buy.1