Sports calculators

Dynasty Trade Calculator

Updated Nov 18, 2026 By Infinity Calculator Formulas Sources
1.0 · Rate
Reference values for NFL players and rookie draft picks
League Settings
QB Format (highest impact)
Scoring Format
TE Premium
Off = no extra points for tight end catches.
Above 12 teams, every player gains a little value against draft picks. Below 12, every player loses a little.
Team Strategy
Startup Mode
Nudges the base values slightly toward one style of roster.
Higher = wider "fair" window on the balance bar.
− win-now  ·  0 neutral  ·  + pick-friendly.
Higher = more value on 1st-round picks, less on later rounds.
Depth/Bench  ←→  Stud/Elite.
Higher = heavier discount on future-year picks.
Trade Interface Total assets: 0

Add players or picks to every active trade side to see your full trade analysis.
Player & Pick Values
Dynasty values for all players and picks under current settings
Name Pos Team Age Value

Introduction

This dynasty trade calculator helps you figure out if a trade is fair before you make it. It gives a reference value to a list of top dynasty players and to rookie draft picks across four drafts, and adjusts each value to your league settings. You pick your format (Superflex or 1QB, PPR or standard, TE premium or not), and the tool calculates values using those settings.

Add players and picks to each side of the trade. The calculator scores every asset, adds up the totals, and tells you who wins. You get a letter grade for each team, a step-by-step breakdown of the math, and charts that show each side's total value and how that value is spread across its assets. If the trade is lopsided, the built-in Trade Wizard suggests assets that can close the gap.

This dynasty fantasy football trade analyzer adjusts values to match your strategy, whether you are competing for a title this year or rebuilding through draft picks. It works for two-team and three-team trades across league sizes from 6 to 32 teams. Stop guessing and start trading with real numbers behind every move.

How to Use Our Dynasty Trade Calculator

Enter your league settings and add players or draft picks to each trade side. The calculator will score the trade, show who wins, and grade each team's return so you can make smarter dynasty deals.

QB Format: Pick 1QB if your league starts one quarterback. Pick Superflex / 2QB if your league lets you start two quarterbacks or a superflex spot.2 This setting has the biggest impact on quarterback values. Superflex / 2QB raises every quarterback's value by 75%.

Scoring Format: Choose Non-PPR, Half PPR, or Full PPR to match how your league scores receptions. Non-PPR leagues give no points for a catch.1 Full PPR raises wide receiver and tight end values slightly and lowers running back values slightly.

TE Premium: Set this to Off for normal tight end scoring. Turn it up to TE+, TE++, or TE+++ if your league gives tight ends extra points per catch.2 Each step up raises tight end values more.

League Size: Select the number of teams in your league. Above 12 teams, every player's value rises slightly against draft picks, and below 12 it falls slightly.

Team Strategy: Pick the strategy that fits your team right now. Compete boosts older win-now players. Rebuild boosts young players and draft picks. Retool and None keep values neutral.

Startup Mode: Leave this on Normal for most leagues. Use Startup + Picks for a brand-new league that trades rookie picks along with players. It lowers every pick's value by 5%. Use Startup, Players Only to zero out all draft pick values.

Value Tilt: Base values is the default. Veteran and QB tilt nudges quarterbacks and older players up slightly. Youth and picks tilt nudges young players and draft picks up slightly.

Trade Fairness Tolerance: Slide this to set how close a trade must be to count as fair. A higher number means the calculator accepts a wider gap before calling a trade lopsided.

Future Pick Adjustment: Slide left to lower the value of every draft pick, the nearest draft's included, for a win-now build. Slide right to raise every pick's value for a rebuild.

Rookie Pick Optimism: Set it high to raise first-round picks and lower picks in later rounds. Set it low to do the opposite.

Valuation Factor: Slide toward Depth to narrow the gap between the highest- and lowest-valued players. Slide toward Stud to widen the gap between elite and average assets.

Future Pick Factor: Controls how much future-year picks lose value for being far away. A higher number means picks two or three drafts away drop more than picks in the nearest draft.

Number of Teams: Click Two Teams for a standard trade or Three Teams for a three-way deal. Each side gets its own search bar and asset list.

Add Players and Picks: Type a player name, team, or position into the search bar on each trade side. Click a result to add it. Use a comma before your search to filter players only, or a period to filter picks only. Press the × button to remove any asset.

Calculate: Click the Calculate button to see your full trade analysis. You will get a letter grade for each team, a step-by-step value breakdown, a trade balance bar, value charts, a quick facts table, risk warnings, and a Trade Wizard that suggests assets to make a lopsided deal fair.

What Is Dynasty Fantasy Football Trading?

In dynasty fantasy football, you keep your players year after year, just like a real NFL team.2 Unlike redraft leagues where you start fresh each season and use a fantasy football trade calculator for one-year deals, dynasty leagues let you build a roster over time. This makes trades a big deal. Every trade you make shapes your team for years to come.

Why Dynasty Trade Values Matter

Not all players are worth the same amount. A young star wide receiver is usually worth more than an aging running back. Draft picks also hold value because they give you a shot at the next big rookie, though later-round picks have lower hit rates. A lot of rookies bust.2 Dynasty trade values put a number on each player and pick so you can compare them side by side. Understanding the expected value of each asset helps you figure out if a trade is fair before you accept it.

How League Settings Change Player Values

Your league rules have a huge effect on what players are worth. In a Superflex or 2QB league, quarterbacks are far more valuable than in a standard 1QB league.2 In full PPR (points per reception) leagues, pass-catching players like wide receivers and tight ends get a boost.1 TE premium leagues push tight end values even higher.2 The number of teams in your league also matters. Bigger leagues make good players harder to find, which raises their price.

Key Terms to Know

Superflex means you can start a second quarterback in a flex spot.2 Quarterbacks are worth much more in this format.2 PPR stands for points per reception. It rewards players who catch a lot of passes.1 TE premium gives tight ends extra points per catch on top of normal PPR scoring.2 Draft picks in dynasty work like currency. You can trade future first-round picks, mid-round picks, and more, each with its own value.

Team Strategy and Trading

Your team's strategy should guide every trade. If you are trying to compete and win now, older proven stars hold more value to you. If you are in a rebuild, young players and future draft picks matter more. A retool sits in the middle: you want to stay competitive while getting younger. Knowing your strategy helps you decide which side of a trade benefits your roster most.


Formulas used

Player Dynasty Value
\begin{aligned} V_{\text{player}} &= V_{\text{base}} \times M_{\text{pos}} \times \left(1 + \frac{\text{VF} - 50}{50} \times 0.15 \times \frac{V_{\text{base}} - 1000}{2000}\right) \times M_{\text{strat}} \times \left(1 + (N_{\text{teams}} - 12) \times 0.004\right) \times M_{\text{tilt}} \\ M_{\text{pos}} &= \begin{cases} 1.75 \text{ (Superflex) or } 1 \text{ (1QB)} & \text{QB} \\ 1 + 0.08\,(P - 0.5) & \text{WR} \\ 1 - 0.08\,(P - 0.5) & \text{RB} \\ \left(1 + 0.05\,(P - 0.5)\right) \times t & \text{TE} \end{cases} \\ P &= 0,\ 0.5 \text{ or } 1 \text{ point per reception},\quad t = 1,\ 1.18,\ 1.38,\ 1.6 \text{ for Off, TE+, TE++, TE+++} \\ M_{\text{strat}} &= \begin{cases} 1.08 \text{ if age} \ge 28,\ 0.9 \text{ if age} < 24,\ \text{else } 1 & \text{Compete} \\ 1.12 \text{ if age} < 24,\ 0.85 \text{ if age} \ge 28,\ \text{else } 1 & \text{Rebuild} \\ 1 & \text{None, Retool} \end{cases} \\ M_{\text{tilt}} &= \begin{cases} 1.03 \text{ if QB, times } 1.02 \text{ if age} \ge 28 & \text{Veteran and QB tilt} \\ 1.03 \text{ if age} < 24 & \text{Youth and picks tilt} \\ 1 & \text{Base values} \end{cases} \end{aligned}
Pick Dynasty Value (with future-year discount)
\begin{aligned} V_{\text{pick}} &= V_{\text{base}} \times M_{\text{SF}} \times \left(1 + \frac{O - 50}{50} \cdot k_r\right) \times \left(1 + A \times 0.03\right) \times \left(1 - F \times 0.02\right)^{\,y - y_0} \times M_{\text{strat}} \times M_{\text{start}} \times M_{\text{tilt}} \\ M_{\text{SF}} &= 1.25 \text{ (Superflex) or } 1 \text{ (1QB)},\quad k_r = 0.15 \text{ (round 1) or } -0.05 \text{ (rounds 2 to 5)},\quad y_0 = \text{year of the nearest draft listed} \\ M_{\text{strat}} &= 0.85 \text{ (Compete)},\ 1.18 \text{ (Rebuild)},\ 1 \text{ (None, Retool)} \\ M_{\text{start}} &= 1 \text{ (Normal)},\ 0.95 \text{ (Startup + Picks)},\ 0 \text{ (Startup, Players Only)} \\ M_{\text{tilt}} &= 1.06 \text{ (Youth and picks tilt)},\ 1 \text{ otherwise} \end{aligned}
Value Gap Between Sides
\Delta = \max\!\left(V_{\text{team}_1},\ldots,V_{\text{team}_N}\right) - \min\!\left(V_{\text{team}_1},\ldots,V_{\text{team}_N}\right)
Fairness Tolerance Window
T = \left(0.02 + \text{variance} \times 0.018\right) \times \max\!\left(V_{\text{team}_1},\ldots,V_{\text{team}_N}\right)
Distance from an Even Split per Side (and Trade Verdict)
D_i = \bar{V} - V_{\text{team}_i}\,,\quad \bar{V} = \frac{1}{N}\sum_{j=1}^{N} V_{\text{team}_j}\,,\quad \text{Fair iff } \Delta \le T
Trade Grade Percentage
p_i = \frac{D_i}{\bar{V}}

Frequently asked questions

What is the difference between Superflex and 1QB?

In a 1QB league you start one quarterback, so QB values stay lower. In a Superflex league you can start a second QB in a flex spot, which makes quarterbacks much more valuable.2 Always pick the format that matches your league or your trade values will be wrong.

How does TE premium affect trade values?

TE premium gives tight ends bonus points per catch on top of normal scoring.2 Each tier (TE+, TE++, and TE+++) raises tight end values more. If your league uses a TE premium, turn this on so the calculator prices tight ends correctly.

How do draft pick values work?

Draft picks are valued based on round, slot, and how far away the draft is. A first-round pick in the next draft is worth more than a first-round pick from the same slot two drafts later, because it is closer. Early picks in each round are worth more than late picks. Your settings for pick optimism and future pick factor also adjust these values.

How does league size change values?

Bigger leagues have more teams competing for the same players. This makes good players harder to find and raises their value. A top wide receiver is worth more in a 16-team league than in an 8-team league because the talent pool is thinner.


Sources

  1. League Scoring Types: Standard and Non-PPR. ESPN Fan Support. Accessed September 29, 2026.
  2. Mike Clay. Mike Clay's Playbook, Part 2: Draft tips for nontraditional formats. ESPN. 2026;sections Dynasty leagues, Superflex, TE premium. Accessed November 18, 2026.