eDPI Calculator

Q: What does eDPI stand for?

eDPI stands for effective dots per inch . It is your mouse DPI multiplied by your in-game sensitivity. It gives you one number that shows your true cursor speed in a game.

Q: How do I find my mouse DPI?

Open your mouse software. For Logitech mice, use G HUB . For Razer mice, use Razer Synapse . For SteelSeries, use GG . The DPI is usually shown on the main screen. If you have no software, check the box your mouse came in or search the model name online.

Q: Where do I find my in-game sensitivity?

Go to your game's Settings menu and look under Mouse or Controls . In Source engine games like CS2, you can also type sensitivity in the developer console to see your current value.

Q: Can two different DPI and sensitivity combos give the same eDPI?

Yes. For example, 400 DPI × 3.0 sensitivity and 800 DPI × 1.5 sensitivity both equal an eDPI of 1,200. Your cursor speed in-game will be the same with either setup.

Q: What does the Sensitivity Finder tab do?

It works backward. You enter the eDPI you want and your mouse DPI, and the tool tells you the exact in-game sensitivity to set. This is useful when you want to match a pro player's eDPI or keep the same feel after changing your mouse DPI.

Q: What is ADS sensitivity and when should I use it?

ADS stands for aim down sights . Some games like Call of Duty and Apex Legends apply a separate multiplier when you zoom in with a weapon scope. Enter that multiplier in the ADS field to see your scoped eDPI. If your game does not have a separate ADS setting, leave it at 1.0.

eDPI Calculator

Updated Jun 23, 2026 By Jehan Wadia

Introduction

eDPI stands for effective dots per inch. It is the single number that shows how fast your mouse cursor moves in a game. You get it by multiplying your mouse DPI by your in-game sensitivity. This matters because two players can use very different DPI and sensitivity settings but still have the exact same cursor speed if their eDPI is the same.

This eDPI calculator does the math for you instantly. Enter your mouse DPI and in-game sensitivity, pick your game, and the tool gives you your eDPI, your cm/360° distance, and a comparison to pro player settings. It supports over 100 games including CS2, Valorant, Apex Legends, Overwatch 2, Fortnite, and Rainbow Six Siege. Each game uses a different yaw value, and the calculator accounts for that automatically.

You can also use the Sensitivity Finder tab to work backward. If you know the eDPI you want, it will tell you the exact sensitivity to set in your game. The tool even converts your sensitivity across games so your aim feels the same no matter what you play. If you are also looking to optimize your gaming rig, try our FPS Calculator to check your expected frame rates or our Bottleneck Calculator to identify hardware limitations.

How to Use Our eDPI Calculator

Enter your mouse and game settings below to find your effective DPI (eDPI). The calculator will show your eDPI, how far you move your mouse for a full 360° turn, and how your settings compare to pro players.

Choose your mode. Click the "eDPI Calculator" tab to find your eDPI from a known sensitivity. Click "Sensitivity Finder" to find the sensitivity you need to hit a target eDPI.

Set your Mouse DPI. Type your mouse DPI or click a preset button like 400, 800, or 1600. You can find your DPI in your mouse software, such as Logitech G HUB or Razer Synapse. DPI describes how many dots the sensor registers per inch of movement, similar to how PPI (pixels per inch) measures the density of pixels on a display.

Enter your In-Game Sensitivity. Type the sensitivity number from your game's settings. If your game shows sensitivity as a percent, click the "Percent" button first. Our Percentage Calculator can help if you need to convert between decimal and percent values.

Enter a Target eDPI (Sensitivity Finder tab only). Type the eDPI you want to match, and the calculator will tell you what in-game sensitivity to use.

Set Raw Input. Keep this switch on if your game uses raw input. Turn it off if your game reads Windows mouse settings. When off, a slider appears so you can pick your Windows pointer speed level.

Pick your game. Type in the search box to find your game from the list. Each game has a different yaw value that affects how sensitivity works. If your game is not listed, choose "Custom Yaw" and type the yaw number yourself. For Minecraft players, we also offer a Minecraft Stack Calculator and a Minecraft Server RAM Calculator for other in-game needs.

Add ADS Sensitivity (optional). Click the ADS section to open it. If your game has a separate aim-down-sights multiplier, type it here. Leave it at 1.0 if it does not apply.

View your results. Press "Calculate" or just change any input. The calculator instantly shows your eDPI, your cm/360° and inches/360° distances, a speed rating, a mousepad size suggestion, matching pro player stats, and equivalent sensitivities for other popular games.

What Is eDPI?

eDPI stands for effective dots per inch. It is a single number that shows how fast your mouse cursor moves in a game. You get it by multiplying two things: your mouse DPI and your in-game sensitivity.

For example, if your mouse DPI is 800 and your in-game sensitivity is 1.5, your eDPI is 1,200. A player with 400 DPI and 3.0 sensitivity also has an eDPI of 1,200. Both players will have the exact same cursor speed in-game, even though their settings look different. This is the same principle behind any ratio: different pairs of numbers can produce the same product.

Why eDPI Matters

DPI alone does not tell you how fast you aim. Sensitivity alone does not either. eDPI combines both into one number so you can compare your setup to other players. This is why pro players and coaches use eDPI when talking about aim settings. If you track your competitive performance, our KD Calculator can help you see whether sensitivity changes improve your kill-to-death ratio over time.

A low eDPI means you need to move your mouse a long distance to turn around. This gives you more control for precise aiming. A high eDPI means a small hand movement turns you a lot. This is faster but harder to control.

How cm/360° Works

The cm/360° number tells you how many centimeters you must move your mouse to do a full 360-degree turn in your game. A lower eDPI means a higher cm/360° value, which means more desk space is needed. Many games use a yaw value to convert eDPI into real-world distance. Different games use different yaw values, so the same eDPI can feel different across games. If you want to understand how your monitor's physical dimensions relate to what you see, our Screen Size Calculator and Aspect Ratio Calculator can help you match your display to your setup.

Raw Input and Windows Pointer Speed

Most competitive games have a raw input setting. When raw input is on, the game reads your mouse directly and skips Windows pointer speed settings. When it is off, Windows can speed up or slow down your cursor before the game sees it. For consistent aim, most players keep raw input turned on. Reducing input lag also depends on your system running smoothly, so make sure your hardware is not holding you back by using our Bandwidth Calculator for network performance and Download Time Calculator for estimating game download speeds.

What Is a Good eDPI?

There is no single perfect eDPI. The best range depends on the game you play. In CS2, most pro players use an eDPI between 600 and 1,200. In Valorant, the typical range is 200 to 500. In Overwatch 2, it is 1,500 to 3,500. These ranges differ because each game uses a different yaw value in its engine.

If your eDPI is too low, you may not be able to turn fast enough in close fights. If it is too high, you may struggle to land precise shots at long range. Start within the recommended range for your game and adjust from there based on what feels right. Tracking your win rate before and after sensitivity changes is a practical way to measure improvement. For damage-focused roles, our DPS Calculator can also help you evaluate output alongside your aim settings.

Formulas used

Effective DPI (eDPI)

\text{eDPI} = \text{DPI} \times \text{Sensitivity}

Required Sensitivity from Target eDPI

\text{Sensitivity} = \frac{\text{eDPI}_{target}}{\text{DPI}}

Inches per 360° Turn

\text{in/360°} = \frac{360}{\text{eDPI}_{base} \times \text{Yaw}}

Centimeters per 360° Turn

\text{cm/360°} = \text{in/360°} \times 2.54

Cross-Game Sensitivity Conversion

\text{Sens}_{target} = \text{Sens}_{source} \times \frac{\text{Yaw}_{source}}{\text{Yaw}_{target}}

ADS Effective DPI

\text{eDPI}_{ADS} = \text{eDPI} \times \text{ADS Multiplier}

Frequently asked questions

What does eDPI stand for?

eDPI stands for effective dots per inch. It is your mouse DPI multiplied by your in-game sensitivity. It gives you one number that shows your true cursor speed in a game.

How do I find my mouse DPI?

Open your mouse software. For Logitech mice, use G HUB. For Razer mice, use Razer Synapse. For SteelSeries, use GG. The DPI is usually shown on the main screen. If you have no software, check the box your mouse came in or search the model name online.

Where do I find my in-game sensitivity?

Go to your game's Settings menu and look under Mouse or Controls. In Source engine games like CS2, you can also type sensitivity in the developer console to see your current value.

What is yaw and why does it change per game?

Yaw is a number built into a game's engine that controls how many degrees your view turns per mouse count. CS2 uses a yaw of 0.022, while Valorant uses 0.07. Because yaw differs, the same eDPI will feel faster or slower depending on the game. This calculator picks the correct yaw automatically when you select your game.

Can two different DPI and sensitivity combos give the same eDPI?

Yes. For example, 400 DPI × 3.0 sensitivity and 800 DPI × 1.5 sensitivity both equal an eDPI of 1,200. Your cursor speed in-game will be the same with either setup.

Should I use a higher DPI with a lower sensitivity, or the other way around?

A higher DPI with a lower sensitivity is usually better. Higher DPI means the sensor sends more data points to the game, which can make tracking smoother. Most pros use 400 or 800 DPI and adjust sensitivity to reach their target eDPI, but 1600 DPI works great too.

What does the Sensitivity Finder tab do?

It works backward. You enter the eDPI you want and your mouse DPI, and the tool tells you the exact in-game sensitivity to set. This is useful when you want to match a pro player's eDPI or keep the same feel after changing your mouse DPI.

What does cm/360° mean?

It is the distance in centimeters you must move your mouse to do a full 360-degree turn in the game. A higher cm/360° means you need more desk space but get more precise aim. A lower cm/360° means faster turns but less control.

How does the cross-game sensitivity conversion work?

Each game has a different yaw value. The calculator takes your current sensitivity and yaw, then divides by the other game's yaw. This gives you a new sensitivity number that produces the same physical mouse movement for a 360° turn in the other game.

What is ADS sensitivity and when should I use it?

ADS stands for aim down sights. Some games like Call of Duty and Apex Legends apply a separate multiplier when you zoom in with a weapon scope. Enter that multiplier in the ADS field to see your scoped eDPI. If your game does not have a separate ADS setting, leave it at 1.0.

What does the Percent mode do for sensitivity?

Some games show sensitivity as a percentage instead of a decimal. When you turn on Percent mode, the calculator divides your input by 100. So entering 50 is treated as 0.50 sensitivity.

Should I turn Raw Input on or off?

Keep it on for most games. Raw input makes the game read your mouse directly and skip Windows pointer speed settings. This gives you consistent, predictable aim. Only turn it off if your specific game does not support raw input.

What is Windows Pointer Speed and how does it affect eDPI?

Windows Pointer Speed is a system setting that multiplies your mouse movement. The default is level 6 (1× multiplier), which changes nothing. If raw input is off and this is set to a different level, your actual eDPI will be higher or lower than the basic DPI × sensitivity calculation.

My game is not in the list. What should I do?

Select Custom Yaw from the game dropdown. Then type the yaw value your game uses. You can usually find this in your game's documentation, community wiki, or forums. If you cannot find it, 0.022 is a common default used by many Source and Unreal engine games.

What mousepad size do I need for my eDPI?

The calculator suggests a pad size based on your cm/360°. As a general guide:

Under 20 cm/360° — Any standard pad works.
20–35 cm/360° — A medium pad (35 cm wide or more).
35–50 cm/360° — A large pad (45 cm wide or more).
Over 50 cm/360° — An XL pad (90 cm wide or more).

How accurate is the pro player comparison?

Pro player settings are based on publicly shared data from tournaments and community databases. Players change their settings from time to time, so the values may not always be current. Use them as a general reference point, not an exact target.

Does changing my monitor resolution or refresh rate affect eDPI?

No. eDPI is based on your mouse DPI and in-game sensitivity only. Resolution and refresh rate affect how the game looks and feels, but they do not change how far your view turns per inch of mouse movement.

What does the speed scale bar show?

It shows whether your cm/360° falls into a fast (under 20 cm), medium (20–50 cm), or slow (over 50 cm) category. A marker shows where your current setting sits on that scale so you can see at a glance how your speed compares.

Can I copy my eDPI result?

Yes. Click the Copy eDPI button below the result. The number is saved to your clipboard so you can paste it into a chat, spreadsheet, or note.

How do I match a friend's sensitivity if we play different games?

Ask your friend for their DPI, sensitivity, and game. Enter those values in the calculator and check the cross-game sensitivity table at the bottom. Find your game in that table, and the number shown is the sensitivity you should use to get the same physical feel.